Product ID:EA 9309 PART B
MSDS Date:01/01/1987
FSC:8040
NIIN:01-012-8749
Kit Part:Y
MSDS Number: BNPTR

Emergency Phone: 415-687-4201

Info Phone: 415-687-4201

Cage: 79436

Telephone: 202-483-7616

Cage: 33564

ALKYLAMINES

Fraction By Weight: 98%

COUPLING AGENT

Fraction By Weight: 2%

Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITA TION PERSISTS OR INCREASES, SEE PHYSICIAN.

Flash Point:200F,93C
Extinguishing Media:WATER SPRAY OR FOG, FOAM, CO2, DRY CHEMICAL
EXTINGUISHERS.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED LOCATIONS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS, OR USE DETERGENT.

Handling and Storage Precautions:KEEP PRODUCT COOL IN ACCORDANCE WITH
LABEL INSTRUCTIONS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:THE USE OF A NIOSH APPROVED MASK FOR TOXIC DUSTS
IS REQUIRED IF CURED PRODUCT IS TO BE DRY SANDED, ABRADED, ETC.
Ventilation:LOCAL EXHAUST REQUIRED WHEN SANDING CURED PRODUCT.
MECHANICAL (GENERAL) VENTILATION IS RECOMMENDED.
Protective Gloves:PLASTIC, LATEX, OR SIMILAR.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health
* (HAZARDOUS POLYMERIZATION CONDITIONS TO AVOID CONT'D) TO BE BONDED.
FAILURE TO OBSERVE CAUTIONS MAY RESULT IN EXCESSIVE HEAT BUILD-UP
WITH THE RELEASE OF TOXIC GASES.

Appearance and Odor:TRANSPARENT RED LIQUID WITH AMMONICAL ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:MIXING RESIN & CURING AGENT IN
BATCHES GREATER THAN 1 LB. DON'T HEAT MIXED ADHESIVE ABOVE 75F
UNLESS CURING SURFACES *

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARDOUS CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.
DISPOSAL METHOD CAN BE LAND BURIAL OR CHEMICAL INCINERATION AS
REGULATED BY ALL GOVERNMENT AL AGENCIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.